| Performance
Objectives: |
| |
Pass |
Fail |
| Topic
1: Piping and Instrumentation Diagrams |
| |
|
|
| 1.1
Using a P & ID, explain how a process
system in your unit is monitored and
controlled. |
____ |
____ |
| |
|
|
| 1.2
In the field and control room, locate the
components of the instrumentation shown
on the P & ID. |
____ |
____ |
| |
|
|
| 1.3
Using a P & ID of a process system, trace
the material and utility flows through the
equipment, noting the location and function(s) of instrumentation as it
is encountered
at your site. |
____ |
____ |
| |
|
|
| 1.4
Given a P & ID, and operating data including
indication(s) of a problem in a process
system, determine the location and nature of
the problem. |
____ |
____ |
| |
|
|
| 1.5
Find the instrument identification chart on a
P & ID of a process system at your site. Identify
each instrument on the chart, stating its location,
type of variable involved, function(s), and
equipment/instrument identification number(s). |
____ |
____ |
| |
|
|
| 1.6
Determine which instrument signal lines on the
P & ID represent pneumatic signals and which
represent electric signals. |
____ |
____ |
| |
|
|
| |
|
|
| Topic
2: Using a System Diagram |
|
|
| |
|
|
| 2.1
On a flow diagram or P & ID of a process
system at your site, locate the following and
describe the information provided by each: a
legend, equipment identification and description,
reference to other diagrams, operation notes, and
the title block. |
____ |
____ |
| |
|
|
| 2.2
Identify the equipment and instrumentation
symbols used on flow diagrams and P & ID’s
at your site. |
____ |
____ |
| |
|
|
| |
|
|
| Topic
3: Electrical Diagrams |
|
|
| |
|
|
| 3.1
Identify the symbols used on the electrical one-line diagrams at your site. |
____ |
____ |
| |
|
|
| 3.2
On a one-line diagram, trace the flow of power
from its source to a specified load. |
____ |
____ |
| |
|
|
| 3.3
Locate the circuit(s) at your site and locate and
identify all of the equipment which is part of
the circuit(s). |
____ |
____ |
| |
|
|
| 3.4
Using a one-line diagram as a guide, locate a
load at its associated breaker in the field by
equipment number(s) and verify that the load
is/is not isolated from the power source. |
____ |
____ |
| |
|
|
| 3.5
Identify the symbols on a one-line electrical
diagram for a process area, trace out the diagram,
and briefly describe its connections. |
____ |
____ |